The SFT Ruckus GY6 Swap Mount
The Small Fast Things Ruckus GY6 Swap Mount is a culmination of years of development, prototyping, and testing. We sought to address a variety of different problems with conventional GY6 mounts while creating a mount that was easy to use and cost effective.
One major problem we have found and sought to address is running issues associated with carb angling and positioning. Conventional GY6 mounts out there require the use of clocking flanges that faces the GY6 forward and at odd angles. This actually affects the fuel level in the carb bowl and causes problems such as hard starting, rough idling, and bogging at W.O.T.
Facing the GY6 forward causes the carb not to sit level.
With the SFT Ruckus GY6 Swap Mount, the design of our mount allows for full unobscured mounting of the carb backwards, which was how the GY6 was designed.
You also get full 3/8" solid steel construction and an interlocking design that makes for a bulletproof and strong mount. We have no problems using this mount on our 171cc shop build.
As you can see in the photos below, the simplicity of the design and installation is second to none. There is no need to grind, remove, or weld on any additional parts. The kit is fully removable at any time!
As you can see above, the cutout in the SFT Ruckus GY6 Swap Mount allows plenty of room to mount and position the stock carb backwards. You can also use aftermarket Slide Carbs up to 32mm.
Below is the installation guide for the Best Honda Ruckus GY6 Swap Mount.